Cookiez Kreationz Corner Stop

Friday, August 8, 2014

PTU: A Sea Maiden Mystery

9:44 PM | Posted by Cookiez Kreationz | | Edit Post

Firstly want to say Tasha you are awesome thank you so much for gifting me Zlata_M tube Seamaid, she goes perfectly well with you Midnight Ocean kit, thanks so much, if you have any mermaid, make sure you grab Tasha's Playground kit "Midnight Ocean" it is an awesome kit to use with tons of mojo fairy dusting inspiration everywhere. "A Sea Maiden Mystery"

You can find Tasha's kit Midnight Ocean @ ThePSPProject or @ Designer Scraps

Seamaid by: Zlata_M

Labels: ©Zlata M, Designer Scraps, PFD, Tasha's Playground, THEPSPPROJECT | 0 comments

Tuesday, August 5, 2014

PTU: Time for Tea Tutorial

8:50 PM | Posted by Cookiez Kreationz | | Edit Post

How cute is it to have this tube "Mouse in a Cup" by Alicia Bel, only sold at ThePSPProject Store. And check out this crazy cookie animation I did using her mouse. Definitely a must buy, cause it's so simply cute not to have and try out your animation skills.

"Time For Tea"

Artist By : Alicia Bel

Template: Time for Tea by me.

I have an animation tag tutorial woohoo, thought animated a banner was hard, well, for this, I had to go use my Photoshop, but Psp is also okay to use for this tutorial just keep in mind, while your in your Psp you will have to merge a lot of times and requires you using Jasc animation in the end, but you will love how cute it all turns out tho. ** Just a note, not all artist allows animation of their tubes, be sure to read all terms of use before proceeding ahead, Alicia Bel allows animation, so that is why I choose her tube, if you wish to use the same please stop by ThePSPProject store to purchase it today, and try it out :) If you should need me to explain these steps for Psp, please comment a request below for one and if I should have time I will write one up for Corel psp users.
Ok onto Photoshop. Open the template "Time For TEA" template I made. Next, for those who did purchase the same tube I am using, please follow the next steps. First step re-sized 60% and then copy and paste into your working canvas. Make sure its slightly centered Next Duplicate your original tube 3x, and then hide your first original tube. [[Just in case you messed up you always have the original to go back to]] Take your duplicate copy, and grab your eraser tool, and zoom in close enough to start erasing around its whiskers, and the tail. yes all the tail has to be erased too, including the lady bugs. By now your mouse looks funny without her tail, so the next step is your going to grab your brush tool, make sure it matches the color of the tea cup, and brush over the part where you erase her tail. Next step take your third duplicate copy, using your eraser tool, zoom in and erase the mouse, leaving just her tail and ladybugs alone. Ok Next your going to duplicate just the tail. For the duplicated tail using your lasso tool, cut the ladybug out, I chose the one closest to the cup. And again brush in a little of her tail back after you've cut the lady bug. Remember the lady bug you removed, well paste the ladybug back, and move the ladybug back onto the tail. Animation of Lady Bug Now you're going to animate the ladybug, by duplicating 3x and moving the ladybug each time going forward and turning around and going back to its place. Duplicate as many times as you need for this, remember all you are doing to making the ladybug appear to be moving up and down the tail. Animation of Whiskers and Nose Next step to make her nose wiggle, remember the and duplicate copy that just has her whiskers, I need you to duplicate those too up to 3x, Using your Free Transform tool, by Holding down Ctrl+T, maneuver (rotate slightly) her nose left , and then right for the next duplicated layer, and then up if you want for the next duplicated layer of her whiskers to wiggle up, its how ever many times you want to wiggle her nose, make sure you duplicate from the original whisker cut out you did, so you don't lose your place. Next if you wish to, using the Free Transform tool take your original tail, not the one without the lady bug on it, has to be one with all 3 on there, and your going to move her tail up and down. Next Add your name, and license and copyright of your tube which should say if you're using the same as me, "©Alicia Bel, www.aliciabel.com" and then your TPP license. And if you wish to, you can change the word art or apply a gradient glow to the word art. Now that you have completed these steps its onto your animation if you got CS3 or higher, you have it already there, just open your "WINDOW" option and check mark animation, and it will pop up for you. Now just simply open and close each layer that you desire to movement to be made, and then once you are happy with your frames and time. Save as gif.

Labels: ct, ptu, THEPSPPROJECT, tutorial | 0 comments

Tuesday, July 29, 2014

PTU: Bayside Beauty

8:23 PM | Posted by Cookiez Kreationz | | Edit Post

Catching some sun before winter blows in, check out Karra's Kreations latest kit "Beauty by the Bayside," it's a sweet buy isn't it. Check out my tutorial "Bayside Beauty" "Bayside Beauty"

PTU: Karra Kreations ~"Beauty by the Bayside"

Art by Ellie_Milk

Filters: Porcelian, MuRa Meister

Enjoy my tutorial :)

You must have working knowledge of Corel Paint Shop Pro X2 or newer

Okay Ready, set, GO!

Open a new canvas 650 x650

Copy and paste kkpaper13, into your new canvas, next step is to turn this layer to a masked layer.

Head to your layers tab-->Load/Save Mask-->Load Mask from Disc

From there choose circular poity type mask.

And then Click Load

Next step, you will want to Merge group

Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse

Next it will pop another option for you, you want to look for "Merge"--> "merge group".

Tada you have a masked layer.

Next open these elements, re-size according to my specifications, add a drop shadow if you wish to do so, then copy and paste into your canvas.

(If I had left the re-size % out, it's because I did not have to re-size).

Now onto the ELEMENTS FOLDER:

kk_clouds,

kk_fence, re-size to 60%, add d/s, then c/p, and duplicate, then hold down CTRL+M (to mirror) this will make the fence look longer.

kk_banner2, re-size to 60%, apply the same steps as you did for kk_fence.

kk_flowers, re-size to 60%, then hold down CTRL+R, choose "RIGHT" for direction, and for degree choose "90 Degrees", then apply the same steps as you did for kk_fence.

kk_anchor, re-size to 45%

kk_flower3, enlarge this element canvas to 650x650, becuase unless you have miester copies continue on these steps, if not then paste a buch of these flowers everywhere you need to hide holes and gaps, re-size them if need be to about 12% or less.

**Okay for those who have MuRa meister-copies effect, here we go,

Be sure to place the flower on the top of canvas, then apply your copies effect, no need to adjust settings, keep it as is. Play around with the effect till you like how the flowers are falling down then place it into your canvas. Then duplicate it 4x, apply your mirror and flip effect, and place them where you want them to be.

kk_sign1, re-size 40%

kk_flower4, duplicate, re-size one to 37%, and the other one to 50%, add d/s, then c/p, and duplicate one more time for each sizes, and then hold down CTRL+M (to mirror)

kk_bike, re-size 50%, and then hold down CTRL+M (to mirror)

Ok at this point, you can place your half tube here, apply your d/s and what otehr effects you like to do.

kk_leaves, re-size 40%, then hold down CTRL+R, choose "RIGHT" for direction, and for degree choose "90 Degrees", add d/s, then c/p, and duplicate, then hold down CTRL+M (to mirror) .

kk_beach bag, re-size to 35%

kk_flower1, re-size to 20%

kk_bow2, re-sixe 35%, add d/s, then c/p, and duplicate, then hold down CTRL+M (to mirror) .

kk_ribbon3, re-szie to 60%, add d/s, then c/p, and duplicate, then hold down CTRL+M (to mirror) .

kk_wordart1, apply a gradient glow effect, and use this color code to match the mask color, #73d2c6

kk_butterfly, re-size to 10%, add d/s, then c/p, and duplicate, then hold down CTRL+M (to mirror) and CRTL+I to flip the duplcated butterfly.

Place the elements into your canvas, according to the instructions.

AND

Now Add your copyrights of your tube and your license.

Add your name.

And your done.

Labels: ct, Karra's Kreative Korner, PFD, tutorial | 0 comments

Thursday, July 24, 2014

PTU: Red Queen Tutorial

8:55 PM | Posted by Cookiez Kreationz | | Edit Post

Introducing an amazing Red Queen Bundle available for purchase only at ThePSPProject store, check out the tutorial I have written up for you, and stop by the store to catch this amazing deal today. "Red Queen"

Artist: Joahannah von Frankenstein

PTU: Cora- by Irish Princess Designs

Mask: Vix_BigMask018

Enjoy my tutorial :)
You must have working knowledge of Corel Paint Shop Pro X2 or newer Okay Ready, set, GO!
Open a new canvas 650 x650 Copy and paste IPD_Cora_Paper4, into your new canvas, next step is to turn this layer to a masked layer. Head to your layers tab-->Load/Save Mask-->Load Mask from Disc From there choose Vix_BigMask018. And Click Load Now you want to Merge group Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse Next it will pop another option for you, you want to look for "Merge"--> "merge group". Tada you have a masked layer. Next open these elements, re-size according to my specifications, add a drop shadow if you wish to do so, then copy and paste into your canvas. (If I had left the re-size % out, it's because I did not have to re-size).
Now onto you ELEMENTS FOLDER: IPD_Cora_Element73, re-size to 75% IPD_Cora_Element75, re-size to 80% IPD_Cora_Element76, re-size to 30% and 35%, duplicate 10x, and spread them around to make a rectagular border. IPD_Cora_Element60, duplicate 2x, paste it on top and bottom over IPD_Cora_Element76 IPD_Cora_Element74, re-size to 67% IPD_Cora_Element18, re-size to 50% IPD_Cora_Element81, re-size to 20%, and place this in front of rabbit in IPD_Cora_Element18 IPD_Cora_Element19, re-size to 43% IPD_Cora_Element77, re-size to 80%, so my signature to place the vine of leaves at. IPD_Cora_Element3, re-size to 60%, duplicate 2x mirror one of them, and place side by side [[see my signature for example]] Right at this point you will want to add your half tube and place it behind the grass of skulls. IPD_Cora_Element95, re-size 50% and place the cat in front on the grass of skulls. IPD_Cora_Element21, re-size 12%, apply mirror effect and sit it on top of IPD_Cora_Element95 Place the elements into your canvas, according to the extra instructions. AND Now Add your copyrights of your tube and your license. Add your name. And your done.

Labels: ct, Irish Princess Designs, THEPSPPROJECT, tutorial | 0 comments

Sunday, July 6, 2014

PTU: The Hotness Banner Tutorial

6:26 PM | Posted by Cookiez Kreationz | | Edit Post

Hey made a new banner from scratch and I must say I like it a lot and I hope you will too. For any beginners out there looking for a simple basic banner, I have written this one up just for you. Check out this latest Photographer I picked, Keith Selle. Haven't heard of him???

Well he has loads of photos for you to buy, check them out on sale only at your local Thepspproject Store.

Art By : Keith Selle

Enjoy my tutorial :)

You must have working knowledge of Corel Paint Shop Pro X2 or newer

Okay Ready, set, GO!

Open a new canvas 650 x250

Today we are making a banner, all from scratch, so if you aren't familiar with making banners, follow me step by step.

Ready ?!?

Here we go....

In your new canvas, flood fill it with pink (#f8d7d2),

Next go to your Effects, find Texture effect and choose Blinds.

From there choose the width : 47 with Opacity of : 31, and make sure the color is White, and check mark "Light from left/top"

Then Click OK. ((and then hide this layer. )) you will see why later.

Next step open a new raster layer, flood fill this layer a darker shade of pink (#e76c6b),

Next open your tube, you want the half tube to sit on the far right like how I have mine, and the medium size tube in the center, and after you have added your drop shadows to your tubes, merge these layers together, then set the blend mode to SCREEN.

Next remember the previous layer you have made and hidden, well now you can unhide it.

Then merge these two layer together, and tada you have a background.

Next step grab you close up tube, the closer to her face the better.

Then Copy and paste her to the far left of the banner.

Next open a new layer, this layer with be your border. So for this flood fill it first. With a light pink or dark pink if you wish.

Then push Crtl+A, then go to your selections and look for modify and then look for contract, and make sure it says " number of pixels __" you enter the number 4, click ok to go back to your layers and then hit your delete key once.

By now you should have a border.

You can add drop shadow or, apply a white noise to this border.

Now for the text, you will want a bold looking font. any free font site will have it.

And pick the one you like the best for your Name.

Now that your done with all the steps above it's time to add the artist copyrights of your tube and your license.

And then you are Done.

Labels: ©Keith Selle, ct, ptu, THEPSPPROJECT, tutorial | 0 comments

Monday, June 9, 2014

PTU: Neenja Style Tutorial

10:42 AM | Posted by Cookiez Kreationz | | Edit Post

"Neenja Style"

Artist: KiwiFireStorm

PTU: Neenja Master by Wicked Princess

Enjoy my tutorial :) You must have working knowledge of Corel Paint Shop Pro X2 or newer Okay Ready, set, GO! Open a new canvas 650 x650 Copy and paste WP_NM_PP6 Head to your layers tab-->Load/Save Mask-->Load Mask from Disc From there choose any mask you want or choose the one I used with a circular pattern. And Click Load Now you want to Merge group Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse Next it will pop another option for you, you want to look for "Merge"--> "merge group". Tada you have a masked layer. Next open these elements, re-size (%) if need be. (If I left the re-size out, it's because i did not have to re-size) :) and then copy and paste into your canvas, & apply Drop Shadow to each. **Open WP_NM_PAPER1 element, and change this into a masked layer, and apply a Overlay blend mode to the element. Open - WP_NM_THROWINGSTAR, 30%, Open- WP_NM_THROWINGSTAR2, 20%, Open- WP_NM_THROWINGSTAR3, 30% Open- WP_NM_THROWINGSTAR4, 30% Now for the stars I used a eraser, and changed the brush of the eraser to "smoke puff" and est the size of the eraser brush to be 60%, and using this method erase the corners of each ninja throwing star, this will give the look of you throwing stars into your masked layer. Open- WP_NM_SAI, duplicate, and apply a mirror effect to the duplicate. Here is where you can place your close up ninja tube, right in the center. Arrange the elements to your liking. Now add the artist copyrights of your tube and your license. Add your name. And your done.

The Banner above is also done with the same kit and tube.

Tuesday, May 20, 2014

PTU: Mysterious Banshee Tutorial

7:11 AM | Posted by Cookiez Kreationz | | Edit Post

"Mysterious Banshee"

Artist: Tatjana Art

PTU: Irish Princess Designs "Banshee"

Enjoy my tutorial :)

You must have working knowledge of Corel Paint Shop Pro X2 or newer

Okay Ready, set, GO!

Open a new canvas 650 x650

Copy and paste IPD_Banshee_Wall, until you have filled your whole canvas, or unless you have MuRa Meister - copies effect, you can use that to help you.

Once you have finished filling up your canvas, the next step is to (merge the layers only if you did not use Mura Meister -copies effect), turn this layer to a masked layer.

Head to your layers tab-->Load/Save Mask-->Load Mask from Disc

From there choose any mask you want or choose the one I used with a circular pattern.

And Click Load

Now you want to Merge group

Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse

Next it will pop another option for you, you want to look for "Merge"--> "merge group".

Tada you have a masked layer.

Next open these elements, copy and paste into your canvas, apply Drop Shadow to each, and re-size (%) if need be. (If I left the re-size out, it's because i did not have to re-size) :)

Open- IPD_Banshee_Grass

Open - IPD_Banshee_Frame, 70%, stretch a bit more horizontacally, like I did mine.

Open- IPD_Banshee_Paper8, 40%, apply it under the frame

Open- IPD_Banshee_Pillar, 80%

Open- IPD_Banshee_Moss, 40%

Open- IPD_Banshee_LongRose, 30%, erase the stem, and duplicate a few times and arrange it below the frame or however you want to.

Open- IPD_Banshee_Leaves, 40%

Open- IPD_Banshee_Gargoyle, 30%

Open- IPD_Banshee_Rock, 20%

Add your tube under your frame.

***(Optional) Open-IPD_Banshee_Wall re-size to 30% and arrange it under your frame, like I have done mine***

Arrange the elements to your liking

Now add the artist copyrights of your tube and your license.

Add your name.

And your done.

About Me

Blinkie

I CT For

Proudly CT @

UYA Society Gals

Blog Archive

Followers

Blog Archive

Live Feeds

PTU: A Sea Maiden Mystery

PTU: Time for Tea Tutorial

PTU: Bayside Beauty

PTU: Red Queen Tutorial

PTU: The Hotness Banner Tutorial

PTU: Neenja Style Tutorial

PTU: Mysterious Banshee Tutorial

Pageviews

Fav Blogs

Blog Train

Fav Stores

Popular Posts

Labels

Arrow Key Nav

FACEBOOK