Cookiez Kreationz Corner Stop

Friday, October 24, 2014

PTU: Shoo Zombies Tutorial

7:35 PM | Posted by Cookiez Kreationz | | Edit Post

Taking a second look at Zombies, apparently there's a zombie frenzy out there, but who says you can't look smokin' hot while your on a zombie extermination spree. Check out my latest tutorial featuring art from KiwiFireStorm.

Artist: KiwiFireStorm PTU Kit: Gimptastic Scraps "Falling Limbs" Enjoy my tutorial :) You must have working knowledge of Corel Paint Shop Pro X2 or newer Okay Ready, set, GO! Open new canvas 650x650, Copy Paper2 to your new canvas. What's next, you guest it we are going to change this paper into a mask layer. Got your mouse ready to go??? Head to your Layers tab-->(Click) Load/Save Mask--> (then click) Load Mask from Disc From there choose any mask you want or choose the one I used with a circular pattern. And then (Click)--> Load After this step, right click your mask paper again, and this time you are going to " Merge group" (why merge group??? , because this will convert your three separate layers that your mask option made for you, into one single mask layer to work with) Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse Next it will pop another option for you, you want to look for "Merge"--> "merge group". Tada you have a single masked layer. Next open these elements, re-size (%) if need be. (If I left the re-size out, it's because i did not have to re-size) :) and then copy and paste into your canvas, & apply Drop Shadow to each Open-Paper3, guess what, yes where c/p and turning this paper to a mask as well. Pick a different circular mask pattern. And repeat my Mask steps above. After you have merged the group, duplicate it. Open- Bulrushes Open- Grass (you will be duplicating this as many times as you need, re-sizing it to however you wantm using your move tool) Open- Tent, re-size to 80%, Open-Leaf1 re-size to 80%, duplicate as many times you need point is to layer the base to cover up your half tube bottom. So continue duplicating till your happy, same as the nect few leaves you will be re-sizing and duplicating. Open-Leaf2, re-size 60%, Open- Leaf3, re-size 40%, Open- Log, re-size 45%, Open- Axe, re-size 50%, apply mirror effect, Open- Hand, re-size 40%, Open- Foot, re-size 50%, Open- PoolOfBlood, re-size 50%, duplicate 2x paste between the leaves, Open- Nuts, re-size 56%, and rotate right before C/P Open- Pinecone, re-size 80% Open- Flower3, re-size 70%, duplicate and apply mirror effect to duplicate, Open- your tube, and place it behind the pinecones, and flower3. Now that you have re-sized these elements according to my sizes, added the drop shadows to all. Add your copyrights of your tube and your license. Add your name. And your done :)

Labels: ©KiwiFireStorm, THEPSPPROJECT, tutorial | 0 comments

Wednesday, October 22, 2014

Time for my latest Tag Showoffs for Fall 2014

2:49 PM | Posted by Cookiez Kreationz | | Edit Post

No tutorials for these yet but we shall see, just want to show off a few of my friends AWWWEEESOMEEE kits with my Creations :)

PTU KIT by Karra's Kreative Kreations "Autumn Palette"

PTU KIT by Farrah's Designer Scraps: "Carefree~Domestic Violence Mega Set"

PTU Bundle: "Just Love" found at Zindy's Shop

A Scrap-less Tag of mine

Labels: ©Keith Garvey, ©Zindy, ptu, tags | 0 comments

Thursday, October 9, 2014

PTU: Dragon Heart Tutorial

11:16 AM | Posted by Cookiez Kreationz | | Edit Post

Check out this whimsical Tutorial, featuring the art of Lisa Victoria,

Artist: Lisa Victoria: Dragon Guardian PTU Kit: Fantasy Land by Creative Intentionz Enjoy my tutorial :) You must have working knowledge of Corel Paint Shop Pro X2 or newer Okay Ready, set, GO! Open new canvas 650x650, Copy ciz_fantasyland_paper10 to your new canvas. What's next, you guest it we are going to change this paper into a mask layer. Got your mouse ready to go??? Head to your Layers tab-->(Click) Load/Save Mask--> (then click) Load Mask from Disc From there choose any mask you want or choose the one I used with a circular pattern. And then (Click)--> Load After this step, right click your mask paper again, and this time you are going to " Merge group" (why merge group??? , because this will convert your three separate layers that your mask option made for you, into one single mask layer to work with) Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse Next it will pop another option for you, you want to look for "Merge"--> "merge group". Tada you have a single masked layer. Next open these elements, re-size (%) if need be. (If I left the re-size out, it's because i did not have to re-size) :) and then copy and paste into your canvas, & apply Drop Shadow to each Open-ciz_fantasyland_grass1, and ciz_fantasyland_grass2, using your move tool, stretch out the grass a little bit, and you are going to duplicate them a few times. Open- ciz_fantasyland_fence, re-size to 80%, now the grass you duplicated make sure you put a few behind and in front of the fences. Open- ciz_fantasyland_tree2 leave one as it is no need to re-size, duplicate it and re-size the duplicate 80%. Open- ciz_fantasyland_arch, re-size to 80%, Open-ciz_fantasyland_swing , re-size to 90%, you can just leave it as is and paste it behind the arch, or what I had done was duplicate it a few times and pasted behind the arch giving it a secret garden curtain door made of vines, but you have the option not to do it like what I did. Open-ciz_fantasyland_tree1, re-size 60%, Open- ciz_fantasyland_sign, re-size 60%, Open- ciz_fantasyland_bow1, re-size 25%, Open- ciz_fantasyland_hummingbird2, re-size 40%, Open- ciz_fantasyland_stumps, re-size 40%, Open- Lisa Victoria's tube "Dragon Guardian" Open- ciz_fantasyland_stumps, re-size 40%, Open- ciz_fantasyland_floralarrangement, re-size 50%, duplicate 2x paste around the dragon, Open- ciz_fantasyland_sparkles, re-size 76%, Open- ciz_fantasyland_mushrooms, re-size 40% Open- ciz_fantasyland_frangipani2, re-size 23%, duplicate a few times and spread out around the grass, Open- ciz_fantasyland_frangipani1, re-size 25%, Open- ciz_fantasyland_camellia1, re-size 20%, Open- ciz_fantasyland_wheelbarrow, re-size to 40%, apply mirror effect, Now that you have re-sized these elements according to my sizes, added the drop shadows to all. Add your copyrights of your tube and your license. Add your name. And your done :)

Labels: ct, THEPSPPROJECT, tutorial | 0 comments

Wednesday, October 1, 2014

PTU: Happy Halloween Tutorial

7:49 AM | Posted by Cookiez Kreationz | | Edit Post

It's October time, guess what I love Halloween, let's kick off October with a Halloween tag. Oh and this week 1st of every month, ThePSPProject does there BOGO sales, so don't miss out on those. My favorite is Cris DeLara tube "Jolly Halloween" paired with Abstract's Creation "The Witching Hour" kit. Check out my latest Halloween tutorial for you.
"Happy Halloween"

PTU: The Witching Hour by Abstract Creations Artist: Cris DeLara Template: by Dees Design Template "Come Fly with me" Mask: by Creative Misfits Mask section
Enjoy my tutorial :)
You must have working knowledge of Corel Paint Shop Pro X2 or newer
Okay Ready, set, GO!
Open the template and try to re-size 650 x 650
Next Open p7, and re-size to 650x650, C/P to the last layer of the template. What's next, you guest it we are going to change this paper into a mask layer. Got your mouse ready to go??? Head to your Layers tab-->(Click) Load/Save Mask--> (then click) Load Mask from Disc From there choose any mask you want or choose the one I used with a circular pattern. And then (Click)--> Load After this step, right click your mask paper again, and this time you are going to " Merge group" (why merge group??? , because this will convert your three seperate layers that your mask option made for you, into one single mask layer to work with) Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse Next it will pop another option for you, you want to look for "Merge"--> "merge group".
Tada you have a single masked layer.
***For Dee's template, I did not use all the template layers, but its completly up to you if you want to or not, and I choose to leave the word art, but you don't have to if you don't want to.
Next, choose any papers you like, from papers folder, C/P them each over the shapes of the template.
This next step will help you see what I had done to cut the papers out to the shapes of the template, if you need it. If not then you can skip this part :) Open p3 Copy and paste it over one of the rectangles of the template, next you will want to grab your magic wand tool, click on the rectangle of the template, press Ctrl+Shift+I on your keyboard, this will allow you to invert. Next click the p3 you've pasted, and hit your delete key once.
*Continue with the same steps for all the shapes of the template. For this particular template I didn't use everything included, but that's just personal preffrences but by all means you are welcome to do what ever you wish. Now once your done you should have perfectly cut shapes, layered with your favorite papers.
Next open these elements, re-size (%) if need be. (If I left the re-size out, it's because i did not have to re-size) :) and then copy and paste into your canvas, & apply Drop Shadow to each
Open-e42, re-size to 80% Open- e27, and e26, re-size e27 to 60%, and duplicate e26 four times, re-szie one of them 60%, and leave a few as they are, the idea you are going for is pasting these flowers around the tube, so she appears to be sitting on the flowers, this works well for a sitting tube or half tube, and if you like my tube I choose, which is "Jolly Witch" by Cris DeLara, you can find her at ThePSPProject Store. Open- e55, re-size to 40%, And sharpen the element, Open- e22, re-size 36%, Open- e24 Open- e25, re-size 60%, Open- e29, re-size 25% Open- e3, re-size 50%, Open- e38, using move tool tilt down right, till the broom is almost straight, but still have an angle, duplicate, and apply mirror effect. Place the brooms behind (e26 (re-sized at 50%)), Open- e31, re-size to 22%,
Now that you have re-sized these elements according to my sizes, added the drop shadows to all.
Add your copyrights of your tube and your license. Add your name. And your done :)

Labels: ©Cris Delara, ct, Halloween, THEPSPPROJECT, tutorial | 0 comments

Tuesday, September 30, 2014

PTU: Livin' for Fall Tutorial

1:01 PM | Posted by Cookiez Kreationz | | Edit Post

So tired of browns and reds the normal colors of fall, if so then Karra Kreationz got something different besides your average Fall colors, come check her "Fall Flava" kit, this will sure to get you up and jiving for the fall season coming up.
"Livin' for Fall"

PTU: Fall Flava kit by Karra Kreations Korner Artist: Pinuptoons Template: by Melissaz Creationz Mask: by Aqua Rebel Enjoy my tutorial :) You must have working knowledge of Corel Paint Shop Pro X2 or newer Okay Ready, set, GO! Open the template and try to re-size 650 x 650 Next Open kkpaper6, and re-size to 650x650, C/P to your new canvas. What's next, you guest it we are going to change this paper into a mask layer. Got your mouse ready to go??? Head to your Layers tab-->(Click) Load/Save Mask--> (then click) Load Mask from Disc From there choose any mask you want or choose the one I used with a circular pattern. And then (Click)--> Load After this step, right click your mask paper again, and this time you are going to " Merge group" (why merge group??? , because this will convert your three seperate layers that your mask option made for you, into one single mask layer to work with) Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse Next it will pop another option for you, you want to look for "Merge"--> "merge group". Tada you have a single masked layer. Next, choose any papers you like, from papers folder, C/P them each over the shapes of the template. This next step will help you see what I had done to cut the papers out to the shapes of the template, if you need it. If not then you can skip this part :) Open kkpaper1 Copy and paste it over one of the rectangles of the template, next you will want to grab your magic wand tool, click on the rectangle of the template, press Ctrl+Shift+I on your keyboard, this will allow you to invert. Next click the kkpaper1 you've pasted, and hit your delete key once. *Continue with the same steps for all the shapes of the template. For this particular template I didn't use everything included, but that's just personal preffrences but by all means you are welcome to do what ever you wish. Now once your done you should have perfectly cut shapes, layered with your favorite papers. Next open these elements, re-size (%) if need be. (If I left the re-size out, it's because i did not have to re-size) :) and then copy and paste into your canvas, & apply Drop Shadow to each Open-kk_leaf scatter Open- kk_flower4, re-size to 80% Open- kk_flower2 Open- kk_ribbon1, re-size it to 80%, using your move tool slightly tilt it down-right, duplicate it and apply mirror effect (by holding down CRTL+M) and then flipping it,(by holding down CRTL+I) Open- kk_leaf1, re-size it to 30%, duplicate the leaf a few times apply mirror effect and arrage it around the ribbon1 Open- kk_stapled ribbon, re-size to 75%, duplicate and apply mirror effect to this as well Open- kk_ricrack2, using your move tool slightly tilt it right, duplicate and apply mirror effect to this as well Open- kk_ricrack1, using your move tool slightly tilt it right, duplicate and apply mirror effect to this as well Open- kk_straight ribbon, using your move tool slightly tilt it right, duplicate and apply mirror effect to this as well Open- kk_dandelions, re-sise to 70%, and paste behind wordart. Open- kk_bow1, re-size to 45%, Open- kk_bow2, re-size to 42%, Open- kk_flower1, re-sze to 27%, Open-kk_scrunched ribbon, re-size to 40%, using your move tool slightly tilt it right, duplicate and apply mirror effect to this as well, and then paste them behind bow1 Now that you have re-sized these elements according to my sizes, added the drop shadows to all. Add your copyrights of your tube and your license. Add your name. And your done :)

Labels: ©Pinuptoons, CDO, ct, Karra's Kreative Korner, ptu, tutorial | 0 comments

Thursday, September 18, 2014

PTU: Lovely Thoughts Tutorial

9:04 PM | Posted by Cookiez Kreationz | | Edit Post

Hey Fans of Karra, check out this adorable kit Karra hid from everyone, just kidding. It's so cute and pink who doesn't love something sweet and pink. Check out "Longing for Love" by Karra's Kreative Korner. For you friends, I've written a tutorial just for you to play with.
"Lovely Thoughts"

PTU: Longing for Love Kit by Karra Kreative Korner

Artist: Pinuptoons

Template by: Elegant Inspirations

Enjoy my tutorial :)

You must have working knowledge of Corel Paint Shop Pro X2 or newer

Okay Ready, set, GO!

Open template, re-size it to 650x 650,

Open kkpaper5, and re-size to 650x650, C/P to the last layer of the template.

What's next, you guest it we are going to change this paper into a mask layer.

Got your mouse ready to go???

Head to your Layers tab-->(Click) Load/Save Mask--> (then click) Load Mask from Disc

From there choose any mask you want or choose the one I used with a circular pattern.

And then (Click)--> Load

After this step, right click your mask paper again, and this time you are going to " Merge group" (why merge group??? , because this will convert your three seperate layers that your mask option made for you, into one single mask layer to work with)

Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse

Next it will pop another option for you, you want to look for "Merge"--> "merge group".

Tada you have a single masked layer.

Next, choose any papers you like, from papers folder, C/P them each over the shapes of the template.

This next step will help you see what I had done to cut the papers out to the shapes of the template, if you need it. If not then you can skip this part :)

Open kkpaper8 Copy and paste it over one of the rectangles of the template, next you will want to grab your magic wand tool, click on the rectangle of the template, press Ctrl+Shift+I on your keyboard, this will allow you to invert.

Next click the kkpaper8, and hit your delete key once.

*Continue with the

same steps for all the shapes of the template.

Now you should have perfectly cut shapes, layered with your favorite papers.

Next open these elements, re-size (%) if need be.

(If I left the re-size out, it's because i did not have to re-size) :) and then copy and paste into your canvas, & apply Drop Shadow to each

Open-kk_stamp

Open- kk_sparkles, re-size to 80%

Open- kk_wordart1, re-size 75%, and apply a pinkish gradient glow

Open- kk_ribbon2, re-size it to 80%

Open-kk_ribbon1, re-size it to 80%

Open- kk_feather2, re-size it to 30%

Open- kk_feather1, re-size it to 30%.

Open- kk_basket, re-size to 30%

Open- kk_love letter, re-size to 17%, apply mirror effect, also for this i erased the bottom part of the letter to make it appear its sitting in the basket.

Open- kk_postcard, re-size to 15%, apply mirror effect, also for this i erased the bottom part to make it appear its sitting in the basket.

Open- kk_gift box, re-size to 15%,

Open- kk_body oil, re-size to 15%, also for this i erased the bottom part to make it appear its sitting in the basket.

Open- kk_plant2, re-size 25%, also for this i erased the bottom part to make it appear its sitting in the basket.

Open-kk_key, re-size 20%, and paste onto the basket that already has a ribbon on it, over that ribbon.

Open-kk_flower4, re-size to 42%,

Open-kk_butterflies

Open-kk_heart2, re-size 50%

Now that you have re-sized these elements according to my sizes, added the drop shadows to all.

Add your copyrights of your tube and your license.

Add your name.

And your done :)

Labels: ©Pinuptoons, CDO, Karra's Kreative Korner, ptu, tutorial | 0 comments

Tuesday, September 16, 2014

PTU: Pirate Treasure Tutorial

7:09 PM | Posted by Cookiez Kreationz | | Edit Post

Come see and dig into some sales and deals at ThePSPProject, check out gIO's collection of pirates, and while your there, check out some pirate kits to make a arggg-terrrrific tag/scrap layout featuring your pirate wearing kid, I mean who doesn't love a pirate kit, A Taggers Scrap has a kit just perfect for you to play with, "On Stranger Tides." find these two only at ThePSPProject.

PTU kit by: A Taggers Scrap ~ "On Stranger Tides."

Artist~ gIO

Mask: Design by Vaybs

Enjoy my tutorial :)

You must have working knowledge of Corel Paint Shop Pro X2 or newer

Okay Ready, set, GO!

Open a new canvas 650 x650

Copy and paste paper5, into your new canvas, next step is to turn this layer to a masked layer.

Head to your layers tab-->Load/Save Mask-->Load Mask from Disc

From there choose Mask from Designs by Vaybs.

And Click Load

Now you want to “Merge Group”

Using your mouse, mouse over your layer where you had paste your paper at, and right click on your mouse

Next it will pop another option for you, you want to look for "Merge"--> "merge group".

Tada you have a masked layer.

Next open these elements, re-size according to my specifications, add a drop shadow if you wish to do so, then copy and paste into your canvas.

(If I had left the re-size % out, it's because I did not have to re-size).

Now onto you ELEMENTS FOLDER:

frame6,

barrels, duplicate re-size one to 80%, and the duplicated copy to 60% and apply mirror effect.

Shovel, re-size to 80%, tilt the handle straight up, copy and paste between the two barrels.

Piratesign, re-size to 80% paste it on top of the shovel

sand, duplicate, paste it over the tip of the shovel, to make it look like its in the sand, and for the duplicate move it over to the right more to give and even base, see my signature for example,

greenery3, duplicate leave the original as is and the duplicate re-size that to 50%,

rockpile2,

bag2, re-size 80%,

rock4,

grass1,

driftwood, tilt it slightly up right

rock, re-size 60%,

lantern

treasurechest1, re-size 60%

binoculars, re-size to 60%, apply mirror effect,

parrot2, re-size to 50%,

Place the elements into your canvas, according to the extra instructions.

AND

Now Add your copyrights of your tube and your license.

Add your name.

And your done.

About Me

Blinkie

I CT For

Proudly CT @

UYA Society Gals

Blog Archive

Followers

Blog Archive

Live Feeds

PTU: Shoo Zombies Tutorial

Time for my latest Tag Showoffs for Fall 2014

PTU: Dragon Heart Tutorial

PTU: Happy Halloween Tutorial

PTU: Livin' for Fall Tutorial

PTU: Lovely Thoughts Tutorial

PTU: Pirate Treasure Tutorial

Pageviews

Fav Blogs

Blog Train

Fav Stores

Popular Posts

Labels

Arrow Key Nav

FACEBOOK